ecg logger online with Winfy

We have hosted the application ecg logger in order to run this application in our online workstations with Wine or directly.

Quick description about ecg logger:

NEW V3 version with RTC and buzzer (require V3+ ECG Logger Viewer application)

The ECG Logger project is a Wearable Cardio Monitor for Long-Term (up to 24h) ECG Data Acquisition and Analysis (aka Holter) with an ECG live (real-time) mode.

This project provides a very low-cost open-source "Hardware and Software" for a Cardiac Rhythmic Holter. The hardware has been made very simple and is based on an Arduino Nano micro-controller with boards for SD card mass-storage, instrumentation differential amplifier and RTC. It can help monitoring arrhythmia syndromes such as bradycardia, tachycardia, extra-systoles, pause or flutter.

WARNING:
In no case it can be use to replace a professional medical examination.
Device MUST NOT BE CONNECTED to appliance powered by mains - risk of electrical shocks
**************************************************************************************

see also:
ECG Logger Viewer application : https: //sourceforge.net/projects/ecg-logger-viewer/.

Features:

• Stable, reliable and durable recorder,�based on "Arduino Nano".
• Very low cost (about 30 �/35 $) and easy to built device.
• ECG waveform recording and Event marking.
• Record up to 24-hour of ECG signal.
• Recorded file time stamping with RTC
• Built-in SD card for storage (removable).
• Record waveform details based on high precision and sampling frequency.
• Record the state of heart rate using higher sampling frequency (250Hz).
• Accurate start time record and sampled�data (8/10-bit).
• Small in size (L100 x W60 x H25 mm).
• International standard of 3 leads (single channel).
• No need to compress or delete original data, thanks to the large�storage capability.
• Very simple and user friendly interface (1 LED + 1 Button + Buzzer).
• ------------------------------------------------------
• BUILDING INSTRUCTIONS:
• Device assembly instructions and list of components are available from the Application software Help documentation.
• ------------------------------------------------------
• ECG File format is proprietary
• EDF/BDF format exportation requires the companion software application (ECG Logger Viewer).
• ------------------------------------------------------
• DISCLAIMER: *** RISK OF ELECTRICAL SHOCKS AND DEATH ***
• Persons unskilled, not familiar or unaware of electrical risks are discouraged to get involved.
• This project is ONLY for educational purposes and not aimed for medical diagnostics.
• Use of this project information is under the SOLE RESPONSIBILITY of the USERS.
• This device has not been approved for any kind of use.

Audience: Education.
User interface: Command-line.
Programming Language: C.
Categories: